Front-raked and back-raked bar screens both clean wastewater headworks — but the rake direction changes everything: rag handling, screenings moisture, maintenance access, and drive system durability. This guide works through the real trade-offs before you lock in a specification.
Front-Raked vs Back-Raked Bar Screen: Which One Actually Works for Your Plant? Read More »
Mechanical bar screen sizing requires more than picking a bar spacing and calculating velocity. This guide covers approach velocity at all flow conditions, blockage factors, headloss analysis, and the specification errors that appear repeatedly in commissioning reports.
Mechanical Bar Screen Sizing Guide Read More »
A complete comparison of wastewater bar screen types — manual coarse, mechanised coarse, fine bar screens, step screens, drum screens, and travelling band screens. Covers operating principles, application fit, cleaning mechanism selection, screenings handling, and a practical four-step selection framework for municipal and industrial WWTP design.
Wastewater Bar Screen Types: A Complete Comparison Guide Read More »
A structured framework for calculating screw press return on investment — covering cake disposal savings, polymer cost reduction, energy savings, and maintenance differences. Includes two fully worked examples (belt press and centrifuge conversion) with realistic parameters, sensitivity analysis, and guidance on which assumptions drive the result.
Screw Press Cost Savings & ROI: A Practical Calculation Guide Read More »
A step-by-step explanation of how a multi-disc screw press works: polymer conditioning, gravity thickening, progressive compression, and back-pressure discharge. Includes operating parameters, component failure modes, and the most common causes of underperformance at commissioning.
How a Multi-Disc Screw Press Works: Mechanism, Zones, and Design Principles Read More »
A side-by-side engineering comparison of the three main sludge dewatering technologies. Covers cake dryness by sludge type, polymer consumption, energy use, capital and operating cost, maintenance burden, and a decision framework for selecting the right method for your plant.
Screw Press vs Belt Press vs Centrifuge: Which Dewatering Method Wins? Read More »
What the Class A and Class B biosolids classification system actually requires from your dewatering equipment — performance benchmarks by sludge type, the 22% DS compliance threshold explained, and three municipal field cases.
Screw Press for Municipal Biosolids: Meeting Class A and Class B Standards Read More »
Why food processing sludge is harder to dewater than municipal sludge — and how to configure a screw press correctly for FOG applications. Includes performance benchmarks for 8 sludge types and three field cases from Malaysia, Vietnam, and Thailand.
Screw Press for Food Processing Wastewater: FOG Sludge Dewatering Guide Read More »
A practical three-tier screw press maintenance programme — weekly operator checks, monthly measurements with pass/fail criteria, and annual shutdown inspection tasks — with spare parts inventory table, maintenance log template, and field cases from Malaysia and Thailand.
Screw Press Maintenance: Complete Weekly, Monthly and Annual Checklist Read More »
A practical troubleshooting reference for the 10 most common screw press problems — wet cake, turbid filtrate, motor overloads, ring wear, and seasonal drops — with diagnostic tables, urgency ratings, and three field cases from Southeast Asia and South Korea.
Top 10 Screw Press Troubleshooting Problems and How to Fix Them Read More »
